Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Flip your battery over and lay it down in the rear panel as shown.
  • Flip your battery over and lay it down in the rear panel as shown.

  • Use a pair of tweezers to remove the small strip of tape covering the end of the battery cable (shown in red).

  • When finished installing your new battery, it is essential to cover the bare battery leads with tape to avoid electrical shorts.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.