Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.
Stap 4 vertalen
Stap 4
-
Disconnect these two cables connected to the DC PCB board.
-
Use the same method as with removing the microphone cable, except with using a flathead 3.0mm screwdriver.
-
Gently wiggle the flathead screwdriver back and forth until the connectors comes free.
-
Gently lift the top cover up and off of the camera body, being careful that the loose cables do not snag on anything.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.