Ga door naar hoofdinhoud
Stap 3
Use a screwdriver (T4 if you are using the 54 bit driver kit) to remove the 8  screws along the edges of the phone. There are four in each corner and four in the middle on the sides. Put the screws on the magnetic mat/parts tray or bowl to make sure they are not lost.
  • Use a screwdriver (T4 if you are using the 54 bit driver kit) to remove the 8 screws along the edges of the phone. There are four in each corner and four in the middle on the sides.

  • Put the screws on the magnetic mat/parts tray or bowl to make sure they are not lost.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.