Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Remove the circuit board from the case without disconnecting the wires.
  • Remove the circuit board from the case without disconnecting the wires.

  • Flip the circuit board over so that the tan side is up (instead of the green side).

  • There are a total of six function buttons on the board which correspond to the function buttons on the outer shell. Locate the button on this baord that you intend to replace.

  • The buttons on this board all have white labels near them. This can help you identify which button to replace.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.