Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
There are a total of four screws holding the function button circuit board onto the outer shell of the boombox.
  • There are a total of four screws holding the function button circuit board onto the outer shell of the boombox.

  • Remove the four screws using a Phillips-head screwdriver and gently pull the circuit board up from the case.

  • Be careful not to break or damage the white wires connecting the function button circuit board to the main board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.