Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
Insert your Micro-SIM Card into the hole you cut out of the SIM. If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole. If you cut the hole slightly too big, put a piece of tape over the back of the SIM-Card (the side without the gold contacts) to hold the Micro-SIM in place.   Trim away any excess tape with the knife.
  • Insert your Micro-SIM Card into the hole you cut out of the SIM.

  • If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole.

  • If you cut the hole slightly too big, put a piece of tape over the back of the SIM-Card (the side without the gold contacts) to hold the Micro-SIM in place. Trim away any excess tape with the knife.

  • You may want to add some tape even if the hole is the correct size; this will help prevent the Micro-SIM from coming loose inside the phone and getting jammed when you try to remove it.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.