Ga door naar hoofdinhoud
Stap 2
Lift the front-facing camera end of the LCD shield plate up slightly. Do not attempt to remove the shield plate entirely, it is still attached to the front panel by the adhered-down home button cable.
  • Lift the front-facing camera end of the LCD shield plate up slightly.

  • Do not attempt to remove the shield plate entirely, it is still attached to the front panel by the adhered-down home button cable.

将LCD屏蔽板的前置摄像头那端稍稍往上抬起。

注意 , 不要试图一下子将显示板完全移除,它的Home键排线那里 , 仍然有黏合剂粘在前面板上。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.