Ga door naar hoofdinhoud
Stap 2
Lift the front-facing camera end of the LCD shield plate up slightly. Do not attempt to remove the shield plate entirely, it is still attached to the front panel by the adhered-down home button cable.
  • Lift the front-facing camera end of the LCD shield plate up slightly.

  • Do not attempt to remove the shield plate entirely, it is still attached to the front panel by the adhered-down home button cable.

Levanta un poco el fin de la parte de la camara frontal de la placa de cobertura del LCD

No intentes de completamente quitar la placa de cobertura, aun esta unida al panel frontal por el cable de botón de inicio.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.