Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Pry the camera assembly away from the device, lifting the left side with a spudger. There is a small hook on the right side of the assembly holding it in place. When removing the assembly, be sure to lift it from the left side in order to slide it out from under this hook.
Remove Camera Assembly
  • Pry the camera assembly away from the device, lifting the left side with a spudger.

  • There is a small hook on the right side of the assembly holding it in place. When removing the assembly, be sure to lift it from the left side in order to slide it out from under this hook.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.