Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
The metal cage housing the PCBs as just stuck to the backside of the LCD. Carefully remove adhesive strips, release the cables to LCD and front panel buttons.
Remove metal cage containing PCBs
  • The metal cage housing the PCBs as just stuck to the backside of the LCD.

  • Carefully remove adhesive strips, release the cables to LCD and front panel buttons.

  • Remove SMPS PCB (switching mode power supply) by removing screws around.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.