Ga door naar hoofdinhoud

iPhone 4 屏幕总成更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 6
iPhone 4 Display Assembly Replacement: stap 0, afbeelding 1 van 1
  • Remove the three large-headed 1.5 mm Phillips screws along the SIM card side of the iPhone.

  • Keep track of the washers under each of the screws.

  • Tip: It can be tricky, but it is also possible to just loosen the large-headed 1.5 mm Phillips screws slightly, without having to remove and replace the screw-and-washer set.

  • Remove the small-headed 1.5 mm Phillips screw near the rear camera (previously removed).

取下SIM卡槽侧的3个大头1.5 mm Phillips螺丝.

注意不要弄丢了垫圈。

提示:这有可能很不容易去操作。 可以稍微松开螺丝,无需卸下垫圈和螺丝。

拧下靠近后置摄像头的小头1.5 mm Phillips (以前拆下)

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.