Repareer je spullen Gemeenschap Winkel

Sostituzione scheda logica iPhone 6 Plus

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Italiaans
Volgende stap

Stap 1 vertalen

Stap 1
iPhone 6 Plus Logic Board Replacement: stap 0, afbeelding 1 van 1

  • Remove the following screws securing the logic board to the rear case:

  • Two 2.4 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One 2.1 mm Phillips #00 screw

Togli le seguenti viti che fissano la scheda logica al case posteriore:

Due distanziali a vite da 2,4 mm

Per rimuovere distanziali a vite l'ideale è usare una punta per distanziali a vite iPhone e l'impugnatura cacciavite.

In caso di emergenza, può bastare un piccolo cacciavite a taglio, ma è necessaria un'estrema cautela per evitare che scivolando possa danneggiare i componenti circostanti.

Inserisci qui la traduzione

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.4 mm standoff screws
- [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* orange] One 2.1 mm Phillips #00 screw

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.