Ga door naar hoofdinhoud

Mac Mini Mid 2010 Teardown

Engels
Nederlands
Stap 19
Mac Mini Mid 2010 Teardown: stap 0, afbeelding 1 van 2 Mac Mini Mid 2010 Teardown: stap 0, afbeelding 2 van 2
  • The I/O frame is held to the logic board by a few T6 Torx screws.

  • The two I/O bezel antennas are more visible in this picture. The long antenna wires are grounded periodically along their length, presumably for better signal transmission to the important part - the antennas themselves.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.