Ga door naar hoofdinhoud
Stap 10
The Wi-Fi antenna plate is held in place by four screws. After a good deal of wiggling, the antenna plate can be slid out from under the lip of the outer case.
  • The Wi-Fi antenna plate is held in place by four screws.

  • After a good deal of wiggling, the antenna plate can be slid out from under the lip of the outer case.

La placa de la antena Wi-Fi se mantiene en su lugar con cuatro tornillos.

Después de moverla bien, la placa de la antena se puede deslizar por debajo del borde de la carcasa exterior.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.