Ga door naar hoofdinhoud

Mac Mini Mid 2010 Teardown

Engels
Nederlands
Stap 8
Mac Mini Mid 2010 Teardown: stap 0, afbeelding 1 van 2 Mac Mini Mid 2010 Teardown: stap 0, afbeelding 2 van 2
  • After removing two screws, the fan can be lifted out to access its power connector.

  • The connectors inside this machine look pretty consistent with those found in Apple's current product lineup. Nothing too new here.

  • All three fan screws are isolated with rubber dampers; a feature not seen on older apple machines. Low noise and vibration are big selling points for Apple these days, and the new Mini's idle emission of 14 dB is a testament to those design goals.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.