Skip to main content

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Step 5
When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage. Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket. Lift the volume control cable connector up out of its socket on the logic board.
  • When disconnecting the following connectors, only pry up on the connector, not the socket on the logic board or you risk permanent damage.

  • Use the flat end of a spudger to lift the power button and flash assembly cable connector up off of its socket.

  • Lift the volume control cable connector up out of its socket on the logic board.

当拆除以下接口时,仅在接口上撬动,而不是逻辑主板上的插口, 拆除时请小心,否则可能会造成永久性损伤

用平头撬棒把电源键排线从插口里撬起来。

用平头撬棒把音量键排线从逻辑主板上的插口撬起来。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.