Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 2
Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case. If the adhesive feels hard to slice, apply additional heat and try again. Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.
  • Use an opening pick to slowly separate the Lightning connector and headphone jack cable from the rear case.

  • If the adhesive feels hard to slice, apply additional heat and try again.

  • Carefully work the pick down the right side of the Lightning connector and headphone jack cable, making sure to stop right as you hit the bottom.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.