Ga door naar hoofdinhoud

MacBook Pro 15" Unibody Mid 2010の左側ファンの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 20 handleidingen die deze stap bevatten.

Stap 2
MacBook Pro 15" Unibody Mid 2010 Left Fan Replacement: stap 0, afbeelding 1 van 3 MacBook Pro 15" Unibody Mid 2010 Left Fan Replacement: stap 0, afbeelding 2 van 3 MacBook Pro 15" Unibody Mid 2010 Left Fan Replacement: stap 0, afbeelding 3 van 3
  • Use the flat end of a spudger to disconnect the left fan connector from the logic board.

  • It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

  • The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

スパッジャーの平面側先端を使って、基板から左側ファンのコネクターの接続を外します。

コネクタを解放するにはファンケーブルのワイヤ下からスパッジャーの平面側先端を水平に差し込み、ツイストすると作業が進みます。

ファン用のソケットとコネクタは2番目と3番目の画像で確認できます。スパッジャーでファンコネクターを持ち上げてソケットから外す際、プラスチックのファン用ソケットにダメージを与えないようご注意ください。2番目の画像から基板のレイアウトが確認できます。お持ちの基板とは若干異なる箇所があるかもしれませんが、ファン用ソケットは同じはずです。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.