Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Use the Y1 tri-wing screwdriver to remove the four 2.4mm screws and then pry the entire backing off of the phone including the black clip attached to the top of the motherboard. Use the Y1 tri-wing screwdriver to remove the four 2.4mm screws and then pry the entire backing off of the phone including the black clip attached to the top of the motherboard. Use the Y1 tri-wing screwdriver to remove the four 2.4mm screws and then pry the entire backing off of the phone including the black clip attached to the top of the motherboard.
Remove the phone backing.
  • Use the Y1 tri-wing screwdriver to remove the four 2.4mm screws and then pry the entire backing off of the phone including the black clip attached to the top of the motherboard.

Utilisez le tournevis tri-wing Y1 pour retirer les quatre vis de 2,4 mm, puis soulevez toute la protection du téléphone, y compris le clip noir fixé sur le dessus de la carte mère.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.