Repareer je spullen Gemeenschap Winkel

iPhone 6 Plus LCD 및 디지타이저 교체

Terug naar de handleiding
Engels
Koreaans
Vorige stap

Stap 4 vertalen

Stap 4
iPhone 6 Plus LCD and Digitizer Replacement: stap 0, afbeelding 1 van 3 iPhone 6 Plus LCD and Digitizer Replacement: stap 0, afbeelding 2 van 3 iPhone 6 Plus LCD and Digitizer Replacement: stap 0, afbeelding 3 van 3

  • Carefully lift—but do not remove—the LCD shield plate by lifting the end nearest the earpiece speaker a few millimeters from the display assembly.

  • Gently lift the other end (nearest the home button) to peel the home button cable off the display assembly.

  • Be extremely cautious as you peel the home button cable. It is a fragile cable. If you feel more than slight resistance, we recommend reheating and reusing the iOpener to soften the adhesive.

  • Remove the LCD shield plate off the display assembly.

  • Display assembly remains.

이어피스 스피커에 가까운 끝 부분을 디스플레이 어셈블리에서 몇 밀리미터 들어 올려 LCD 쉴드 플레이트를—분리하지 말고—조심히 들어올리세요.

다른 쪽 (홈 버튼 근처) 끝을 조심히 들어 올려 홈 버튼 케이블을 디스플레이 어셈블리에서 분리하세요.

홈 버튼 케이블을 벗길 때 매우 조심하세요. 케이블은 약합니다. 만약 저항이 느껴지면 iOpener를 다시 가열하고 사용하여 접착제를 부드럽게 할 것을 추천합니다.

디스플레이 어셈블리에서 LCD 쉴드 플레이트를 분리하세요.

디스플레이 어셈블리가 남습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.