Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
The PCB board had water damage, see this in picture 3. To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear. To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.
  • The PCB board had water damage, see this in picture 3.

  • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.