Ga door naar hoofdinhoud

iPhone 6 Plus 전면 패널 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Stap 9
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 1
  • Remove the following Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.5 mm screw

  • One 2.9 mm screw

  • Do not attempt to insert longer screws into the red marked screw holes. Doing so may result in irreparable damage to the logic board.

전면 패널 어셈블리 케이블 브래킷을 고정하는 Phillips/십자 나사들을 분리하세요:

1.2mm 나사 세 개

2.9mm 나사 한 개

2.9mm 나사 한 개

빨간색으로 표시된 나사 구멍에 더 긴 나사를 넣지 마세요. 로직 보드를 영구 손상할 수 있습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.