Repareer je spullen Gemeenschap Winkel

iPhone 6 Plus 前面板组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Stap 2
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 1

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

  • Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

一只手把 iPhone 按下的同时，把吸盘轻轻地往上拉，使前面板组件和后机壳分离。

慢慢来，使用恒定的力量。显示屏组件比大多数的设备都要紧。

使用塑料撬棒，开始轻轻地把后机壳撬下来，在这个过程中继续拉吸盘。

前面板组件和后机壳有几个夹扣连接，所以你需要使用吸盘和撬棒工具组合。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.