Repareer je spullen Gemeenschap Winkel

iPhone 6 Plus 전면 패널 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 18 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Volgende stap

Stap 1 vertalen

Stap 1
iPhone 6 Plus Front Panel Assembly Replacement: stap 0, afbeelding 1 van 1

  • Use a single suction cup to lift the front panel:

  • Press a suction cup onto the screen, just above the home button.

  • Be sure the cup is pressed securely onto the screen to get a tight seal.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

iSclack이 없는 경우 흡입 컵 하나를 사용하여 전면 패널을 들어올리세요:

홈 버튼 바로 위에 흡입 컵을 화면에 누르세요.

단단히 밀폐하기 위해서 컵을 스크린에 꽉 누르세요.

디스플레이가 심하게 깨진 경우 투명 포장 테이프를 붙이면 흡입 컵을 부착할 수 있습니다. 대안으로, 흡입 컵 대신에 매우 강한 테이프를 사용할 수 있습니다. 다른 모든 방법이 실패하면 초강력 접착제를 사용하여 흡입 컵을 깨진 스크린에 붙일 수 있습니다.

-[* black] If you don't have an iSclack, use a single suction cup to lift the front panel:
+[* black] Use a single suction cup to lift the front panel:
[* black] Press a suction cup onto the screen, just above the home button.
[* icon_note] Be sure the cup is pressed securely onto the screen to get a tight seal.
[* icon_note] If your display is badly cracked, [guide|103487|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.