Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 80 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
With the hinge free to move, the iMac will be unbalanced and hard to work on. Repairs are fast and easy with an iMac service wedge, but can be completed without one.
  • With the hinge free to move, the iMac will be unbalanced and hard to work on. Repairs are fast and easy with an iMac service wedge, but can be completed without one.

  • If you are using the iFixit cardboard service wedge, follow these assembly directions to put it together.

  • Before beginning any work on your iMac: Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors.

  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

Con il cardine libero di muoversi, l'iMac sarà sbilanciato e la lavorazione risulterà difficoltosa. È possibile effettuare le riparazioni come indicato, ma risulteranno più semplici e veloci mediante un cuneo per l'assistenza.

Prima di iniziare a lavorare sull'iMac, scollegare il computer dall'alimentazione e tenere premuto il pulsante di alimentazione per 10 secondi per scaricare i condensatori dell'alimentatore.

Fare molta attenzione a non toccare i contatti dei condensatori o qualsiasi punto di saldatura esposto sulla parte posteriore dell'alimentatore. Maneggiare la scheda tenendola solo dai bordi.

[* icon_note] With the hinge free to move, the iMac will be unbalanced and hard to work on. Repairs are fast and easy with an [product|IF145-224|iMac service wedge|new_window=true], but can be completed without one.
[* icon_note] If you are using the [product|IF145-470|iFixit cardboard service wedge], follow [guide|136068|these assembly directions] to put it together.
[* black] '''Before beginning any work on your iMac:''' Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors.
[* icon_caution] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.