Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Use a "Helping Hands" or similar tool to hold the circuit board steady for the solder work. These are the solder connections that will need to be desoldered. Since the board is upside down, left will become right. Use a desoldering wick and flux to melt and remove the solder
  • Use a "Helping Hands" or similar tool to hold the circuit board steady for the solder work.

  • These are the solder connections that will need to be desoldered. Since the board is upside down, left will become right.

  • Use a desoldering wick and flux to melt and remove the solder

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.