Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 10
Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board. The three cables are coded with black sleeves of different lengths. During reassembly: Connect the long-sleeved cable to the center socket.
  • Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.

  • The three cables are coded with black sleeves of different lengths. During reassembly:

  • Connect the long-sleeved cable to the center socket.

  • The short-sleeved cable connects next to the screw.

  • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

  • When reconnecting the antenna cables, run them over the camera cable, not underneath.

把撬棒的尖头插在每一根天线靠近接头处的下面,向上挑起来断开它们与网卡的连接。

三根排线被不同长度的黑套包着。在重新组装的时候:

把长套的排线接到中间的插槽上。

把短套的排线接到靠近螺丝的插槽上。

剩下的一根排线没套,把它接到空着的那个插槽上,靠近风扇的那个。

当连接天线的时候,让它们跨过摄像头排线,别放在摄像头排线下面。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.