Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Engels
Chinees

更换MacBook Pro 13'' Retina显示器2013末期版本的触摸板

Handleidingsinformatie

= Klaar = Onvolledig
    the trackpad. trackpad. This procedure involves using adhesive remover to remove the battery. '''Do not reuse the battery after it has been removed, as doing so is a potential safety hazard.''' Replace it with a new battery. [ ] '''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure. [ ] '''To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.''' A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured. If your battery is swollen, [[What to do with a swollen battery|take extra precautions|new_window=true]].
    the trackpad. trackpad. This procedure involves using adhesive remover to remove the battery. '''Do not reuse the battery after it has been removed, as doing so is a potential safety hazard.''' Replace it with a new battery. [ ] '''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure. [ ] '''To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.''' A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured. If your battery is swollen, [[What to do with a swollen battery|take extra precautions|new_window=true]].

      Beschrijf het specifieke gedeelte of onderdeel van deze device waar u mee bezig bent. Voorbeeld: batterij

      Maak een titel aan.

      Deze korte beschrijving van 1 of 2 zinnen verschijnt in de zoekresultaten.

      Geef achtergrondinformatie weer voordat de lezer de handleiding induikt.

      Stappen

      Stap 1

      把一个加过热的iOpener放在触摸板的盖板上来使固定它的胶软化。

      Stap 2

      用塑料开启工具小心地把触摸板的盖板挑离上部机身(C壳)。

      Stap 3

      用塑料开启工具慢慢地小心地把触摸板盖板从上部机身(C壳)上揭开。

      Stap 4

      轻轻地揭开盖板,拿走它。

      Stap 5

      如果有必要,把覆盖在触摸板排线接头上的所有胶带都揭掉。

      Stap 6

      用撬棒的尖头翻开ZIF接头的卡扣。

      Stap 7

      将触摸板排线直拉出它在主板上的插槽。

      Stap 8

      把撬棒的平头楔在上部机身开口处、触摸板排线途经处的下面。

      Stap 9

      拆掉下列将触摸板挡板固定在触摸板和上部机身(C壳)上的螺丝:

      Stap 10

      用镊子从上部机身(C壳)取走两片触摸板挡板。

      Stap 11

      为避免划伤显示器,打开电脑越90度,然后侧放。

      Stap 12

      轻轻把触摸板从上部机身(C壳)拉出来,小心别划伤排线。

      Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.