Skip to main content

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Step 9
Repeat this procedure with the adjacent battery cell: Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive. Alternatively, re-heat this section with your iOpener if needed.
  • Repeat this procedure with the adjacent battery cell:

  • Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.

  • Alternatively, re-heat this section with your iOpener if needed.

  • Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.

与相邻的电池重复此过程:

将少量液体粘合剂去除剂置于电池底下,并等待2-3分钟以使其渗入并软化粘合剂

或者,如果需要,可以使用iOpener重新加热此部分。

在电池和上机壳之间插入一个塑料卡片,慢慢地撬动电池,来分离黏胶。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.