Ga door naar hoofdinhoud

Stap 4 vertalen

Stap 4
Rotate the midframe/motherboard assembly and reinsert the spudger between the daughterboard and interior midframe. Twist the spudger to separate the last of the adhesive between the daughterboard and interior midframe. Remove the daughterboard from the interior midframe.
  • Rotate the midframe/motherboard assembly and reinsert the spudger between the daughterboard and interior midframe.

  • Twist the spudger to separate the last of the adhesive between the daughterboard and interior midframe.

  • Remove the daughterboard from the interior midframe.

Fai ruotare il gruppo telaio centrale/scheda madre e inserisci a nuovo lo spudger fra la scheda figlia e il telaio centrale interiore.

Torci lo spudger per staccare l'adesivo rimanente fra la scheda figlia e il telaio centrale interno.

Rimuovi la scheda figlia dal telaio centrale interno.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.