Ga door naar hoofdinhoud

Stap 2 vertalen

Stap 2
Pull the connector cable out from the hard drive, applying even pressure while gently rocking up and down.
  • Pull the connector cable out from the hard drive, applying even pressure while gently rocking up and down.

  • Be very careful to apply even pressure when removing the cable. If you torque too hard to either side, you may damage or destroy the hard drive's connector pins, rendering your data inaccessible.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.