Ga door naar hoofdinhoud

iPad Air Wi-Fi Logic Board Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 27
iPad Air Wi-Fi Logic Board Replacement: stap 0, afbeelding 1 van 3 iPad Air Wi-Fi Logic Board Replacement: stap 0, afbeelding 2 van 3 iPad Air Wi-Fi Logic Board Replacement: stap 0, afbeelding 3 van 3
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.