Ga door naar hoofdinhoud

Stap 11 vertalen

Stap 11
Remove the two screws located above the power button board using a Phillips #1 screwdriver. Move the board slowly out of its slot using an opening tool and your index finger. Pull the white ribbon upwards to disconnect the ribbon from the power button board.
  • Remove the two screws located above the power button board using a Phillips #1 screwdriver.

  • Move the board slowly out of its slot using an opening tool and your index finger.

  • Pull the white ribbon upwards to disconnect the ribbon from the power button board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.