Ga door naar hoofdinhoud

Stap 11 vertalen

Step 11
Unscrew the 2-screws located above the power button logic board with a #1 Phillips head screwdriver. Using a flat edge tool, and your index finger began to slowly move the logic board out of it's slot. Disconnect the white ribbon connected to the power button logic board, pulling firmly and steadily.
  • Unscrew the 2-screws located above the power button logic board with a #1 Phillips head screwdriver.

  • Using a flat edge tool, and your index finger began to slowly move the logic board out of it's slot.

  • Disconnect the white ribbon connected to the power button logic board, pulling firmly and steadily.

  • Reverse the order after installing the new power button logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.