Ga door naar hoofdinhoud
Stap 3
Remove the Wi-Fi panel screw with a Phillips #1 screwdriver. Pry the cover panel off with an opening tool. Disconnect the black and white wires. Then push the tabs outward (away from the Wi-Fi card) using your fingers. The card should then pop up.
  • Remove the Wi-Fi panel screw with a Phillips #1 screwdriver.

  • Pry the cover panel off with an opening tool.

  • Disconnect the black and white wires. Then push the tabs outward (away from the Wi-Fi card) using your fingers. The card should then pop up.

  • Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.