Ga door naar hoofdinhoud
Stap 2
Remove the RAM cover panel screws with a #1 Phillips screwdriver. Then pry the RAM cover panel off with an opening tool. Push the tabs that secure the RAM outward (away from the RAM) using your fingers. The RAM should then pop up.
  • Remove the RAM cover panel screws with a #1 Phillips screwdriver.

  • Then pry the RAM cover panel off with an opening tool.

  • Push the tabs that secure the RAM outward (away from the RAM) using your fingers. The RAM should then pop up.

  • Pull the RAM away from the connection to remove. Continue this process until all RAM sticks have been removed from the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.