Ga door naar hoofdinhoud
Step 3
Once all removed you'll see that there is supposed to be a cable connection where you see a big hole. You can then proceed to solder your new connection in like we did. If you decide to replace the entire part you'll need to remove the motherboard.... We'll save that for a different thread.
  • Once all removed you'll see that there is supposed to be a cable connection where you see a big hole.

  • You can then proceed to solder your new connection in like we did. If you decide to replace the entire part you'll need to remove the motherboard.... We'll save that for a different thread.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.