Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 2
After removing the back plate, you'll see some circuit boards. We'll be focusing on the motherboard to the right. (2) Phillips screws hold down covers over your inputs. Note this screw holds down both covers where they overlap.
  • After removing the back plate, you'll see some circuit boards. We'll be focusing on the motherboard to the right.

  • (2) Phillips screws hold down covers over your inputs.

  • Note this screw holds down both covers where they overlap.

  • The bottom cover will not move until the 2 small Phillips screws are removed.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.