Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 71 handleidingen die deze stap bevatten.

Stap 18
Insert a new opening pick and slide it to the middle of the right edge of the iPad, releasing the adhesive as you go. The display cables are located approximately halfway from the bottom of the iPad. Stop sliding the pick when you get ~4.5" from the bottom of the iPad. The display cables are located approximately halfway from the bottom of the iPad. Stop sliding the pick when you get ~4.5" from the bottom of the iPad.
  • Insert a new opening pick and slide it to the middle of the right edge of the iPad, releasing the adhesive as you go.

  • The display cables are located approximately halfway from the bottom of the iPad. Stop sliding the pick when you get ~4.5" from the bottom of the iPad.

Inserta una púa de apertura y deslízala hacia el centro del borde derecho del iPad, liberando el adhesivo a medida que avanza.

Los cables de la pantalla se encuentran aproximadamente a la mitad de la parte inferior del iPad. Deja de deslizar la púa cuando obtenga ~ 4.5" desde la parte inferior del iPad.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.