Ga door naar hoofdinhoud
Stap 2
Using a plastic spudger or similar, gently pry the grey and black wires off. The grey and black wires are the antenna wires so be careful not to damage them
  • Using a plastic spudger or similar, gently pry the grey and black wires off.

  • The grey and black wires are the antenna wires so be careful not to damage them

  • Gently pull the retaining clips away from the board so that the board pops up.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.