Ga door naar hoofdinhoud
Engels
Nederlands
Stap 20
Bend up the second lead and begin to heat it. When sufficiently hot, apply solder to secure the joint. Tin the tip of the iron, then return it to its stand.
Continue soldering the LED in place.
  • Bend up the second lead and begin to heat it.

  • When sufficiently hot, apply solder to secure the joint.

  • Tin the tip of the iron, then return it to its stand.

  • Cut the lead off when you're finished.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.