Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 21
Repeat the steps taken previously. Position the LED and bend one lead down to hold it in place. Solder the other lead in place, then clip off the excess.
Solder the second LED
  • Repeat the steps taken previously.

  • Position the LED and bend one lead down to hold it in place.

  • Solder the other lead in place, then clip off the excess.

  • Bend the first lead back up, then solder in it place as well. Clip the lead when complete.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.