Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 18
It does not mater which lead of the LED you begin soldering. Begin heating up the junction between an LED lead and its pad by pressing the iron into the junction as illustrated. Once the junction is hot enough, add solder until the joint is strong enough.
Solder the LEDs
  • It does not mater which lead of the LED you begin soldering.

  • Begin heating up the junction between an LED lead and its pad by pressing the iron into the junction as illustrated.

  • Once the junction is hot enough, add solder until the joint is strong enough.

  • Tin the iron tip, then return it to its stand.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.