Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
Rest the soldering iron on the battery pad to heat it up. Once the pad is hot enough, begin adding solder. If solder does not flow immediately when it comes in contact with the pad, remove it and allow the pad to heat up longer.
First melts
  • Rest the soldering iron on the battery pad to heat it up.

  • Once the pad is hot enough, begin adding solder.

  • If solder does not flow immediately when it comes in contact with the pad, remove it and allow the pad to heat up longer.

  • Apply a large gob of solder to the pad (as shown).

  • Tin the iron and return it to its stand.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.