Ga door naar hoofdinhoud
Engels
Nederlands
Stap 15
Move the ribbon cable fastener forward and disconnect the USB board cable from the system board. Remove the single retaining screw and lift the USB board from the chassis to remove it. Remove the single retaining screw and lift the USB board from the chassis to remove it.
  • Move the ribbon cable fastener forward and disconnect the USB board cable from the system board.

  • Remove the single retaining screw and lift the USB board from the chassis to remove it.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.