Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 5
Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board. Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive. Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.
  • Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board.

  • Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive.

  • Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.