Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 4
Use the spudger to firmly pry up the plastic housing holding the vibrate motor and loud speaker. Be careful not to pull the plastic housing out right away. The antenna circuit board is still connected to the main body and the antenna could be damaged if pulled on.
  • Use the spudger to firmly pry up the plastic housing holding the vibrate motor and loud speaker.

  • Be careful not to pull the plastic housing out right away. The antenna circuit board is still connected to the main body and the antenna could be damaged if pulled on.

  • Start on the left and slowly move to the right prying up the adhesive and clips holding the plastic unit down.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.