Ga door naar hoofdinhoud
Step 4
Use a Phillips head screw driver to loosen the upper of the two hose clamps on the short coolant hose below the thermostat housing.
  • Use a Phillips head screw driver to loosen the upper of the two hose clamps on the short coolant hose below the thermostat housing.

  • If you'd like to replace this short hose while you have the thermostat housing out, see the replacement guide for the short cooling bypass hose.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.