Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 2
Remove the four screws from the heat sink panel with the phillips screwdriver. Unscrew the two screws from the memory panel with the phillips screwdriver. Remove both panels and set aside.
  • Remove the four screws from the heat sink panel with the phillips screwdriver.

  • Unscrew the two screws from the memory panel with the phillips screwdriver.

  • Remove both panels and set aside.

  • Be careful with the heatsink, as this can be messy if handled improperly. It is a copper heat pipe.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.