Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Remove the RAM expansion board by gently pulling it towards you. The front panel of the computer can then be clipped off. Be careful with the power and disk drive LED's. It is easy to clip them off from the inside of the panel. Remove the Phillips screws holding the metal shield in place.
  • Remove the RAM expansion board by gently pulling it towards you.

  • The front panel of the computer can then be clipped off. Be careful with the power and disk drive LED's. It is easy to clip them off from the inside of the panel.

  • Remove the Phillips screws holding the metal shield in place.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.